No results were found for the filter!
02K71UF - Prevents self-loosening, leakage, unwanted movement and corrosion in the thread
- Max. thread diameter: M20
- Handling Cure Time: 5-15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 400 - 600 mPas
02K701UF - Seals and closes all kinds of screw connections
- Especially adjusted for high oil tolerance
- Max. thread diameter: M20
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 300 - 900 mPas
02K72UF - Especially suited for highly stressed bonds like the protection and sealing of screws, stay bolts, nuts, thread inserts and screw plugs
- Max. thread diameter: M36
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to + 180 °C
- Viscosity: 10.000 - 15.000 mPas
02K75UF - Especially suited for highly stressed bonds like the protection and sealing of screws, stay bolts, nuts, thread inserts and thread plugs
- Max. thread diameter: M36
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to + 180 °C
- Viscosity: 10.000 - 15.000 mPas
02K70UF - Fastening of screws in as-delivered condition, even with minor contamination
- Max. thread diameter: M20
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 300 - 900 mPas
05K11UF - Specially suitable for the sealing of conical / cylindrical pipe screw connections
- Max. thread diameter: M80
- Tangible after approx. 15 - 20 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 15.000 - 25.000 mPas
05K42UF - For sealing of pneumatic and hydraulic screw connections
- Very good chemical resistance
- Max. thread diameter: M26
- Handling Cure Time: 10 - 20 minutes
- Temperature Resistance: -55 °C to +180 °C
- Viscosity: 400 - 800 mPas
06K20 - DVGW approval (tested according to DIN EN 751-1 Class H)
- Max. resistance to hot oil
- Max. gap filling ability: 0,2 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -50 °C to +200 °C
- Viscosity: 5.000 - 12.000 mPas
05K77UF - DVGW approval (DIN EN 751-1 Class H)
- Particularly user and environmentally friendly
- Max. thread diameter: M80
- Handling Cure Time: 10 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 20.000 - 40.000 mPas
05K72UF - DVGW approval (DIN EN 751-1 Class H)
- Particularly suitable for sealing conical/cylindrical tube fittings
- Max. thread diameter: M80
- Handling Cure Time: 15 - 20 min
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 15.000 - 25.000 mPas
06K01UF - For the fixture of bearings, sockets and cases in their delivered condition
- Especially for small gap filling abilities
- Max. gap filling ability: 0,15 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 100 - 200 mPas
06K03UF - Fast curing with high strength
- For static shear stress and dynamic loads
- Max. gap filling ability: 0,15 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 100 - 200 mPas
Viewed
