Wiko

Produkte

Displaying 1 - 185 of 185
    • Universally used product with medium viscosity for easy
      to dismantle screw connections
    • Max. thread diameter: M 36
    • Tangible after approx. 10 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Transparent and solvent -free
    • Structural epoxy resin adhesive
    • Universal bonding of different material combinations
    • Waterproof high-performance fibre tape
    • Excellent adhesive force
    • Repairs, bonds and seals
    • Extremely tear-resistant
    • Waterproof high-performance fibre tape
    • Excellent adhesive force
    • Repairs, bonds and seals
    • Extremely tear-resistant
    • Eliminates graffiti, glue residues and tree gum
    • Solves fat, oil, lubricants, wax and label residues
    • Silicone-free
    • pH-neutral
    • Made of impact-resistant plastic
    • For 50 ml cartridge
    • Mixing ratio 1:1
    • Colour: transparent
    • Permanently elastic, high-strength adhesive
    • Good adhesion on many surfaces
    • Free of isocyanates, solvents and silicones
    • Self-fusing insulating tape
    • Isolates and seals
    • 10 m x 19 mm
    • Double-sided adhesive tape
    • Temperature range: -20 °C to +1.000 °C
    • Effective protection against corrosion und seizing
    • Suitable for applications exposed to high pressure
    • capillary properties
      • Quick curing within 1 - 3 seconds
      • For plastics, natural rubber, (foam -) rubber soft and plastic
    • product with high elongation
    • more user-friedly than comparable polyurethanes
    • CE-Approval (EN15651-1) as a
      joint sealant for facade elements used in interior and exterior areas
    • 1C acrylate adhesive
    • Viscosity: ca. 100 mPas
    • Fully cure in UV light with wavelength of 300 - 400 nm
    • Bubble-free bonding of different materials G3
    • Dismantling with normal tools possible afterwards
    • also suitable for fine threads
    • Max. thread diameter: M 12
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Transparent and solvent -free
    • Structural epoxy resin adhesive
    • Universal bonding of different material combinations
    • high resistance to temperature: -65 °C to 260 °C (shortly up to +315 °C)
    • resistant to effects of weather-/ UV radiation and aging
    • above average curing rate, skin formation and tack free time
    • Fast, easy and thorough removal of labels
      • Efficient removal of adhesive residues
      • Non-corrosive and pH neutral
    • Made of impact-resistant plastic
    • For 37 ml cartridge
    • Mixing ratio 10:1
    • Colour: white
    • Temperature resistance : -40 °C to +100 °C, shortly up to +180 °C
    • Elastic and moisture-curing adhesive and sealant for assembly and construction
    • UV stable
    • Free of isocyanates, solvents and silicones
    • Temperature range: -20 °C to +1.100 °C
    • Effective protection against corrosion und seizing
    • Reduced friction and wear
    • Quick curing within 3 - 6 seconds
      • For plastics, natural rubber, (foam -) rubber soft and plastic
      • Extremely resistant to aging
    • 1C acrylate adhesive
    • Viscosity: ca. 800 mPas
    • Fully cure in UV light with wavelength of 300 - 400 nm
    • Bubble-free bonding of different materials
    • Universally used product with an excellent resistance to media and heat
    • Fast curing, also on stainless steel and passive surfaces
    • Max. thread diameter: M 36
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Reliable bonding of different materials
    • Colour: metal
    • high resistance to temperature: -65 °C to 260 °C (shortly up to +315 °C)
    • resistant to effects of weather-/ UV radiation and aging
    • above average curing rate, skin formation and tack free time
    • Completely residue-free
      • Leaves no film behind and is non-corrosive
      • Extremely fast evaporation
    • Made of impact-resistant plastic
    • For 37 ml cartridge - Mixing ratio 10:1
    • For 50 ml cartridge - Mixing ratio 1:1
    • Colour: grey
    • Temperature resistance : -40 °C to +100 °C, shortly up to +180 °C
    • Elastic and moisture-curing adhesive and sealant for assembly and construction
    • UV stable
    • Free of isocyanates, solvents and silicones
    • Temperature range: -20 °C to +1.500 °C (cartridge), -30 °C to +1.400 °C (cans)
    • Serves as lubricating paste and assembly paste
    • High temperature resistance, extremely adhesive, reduced friction and wear
    • Quick curing within 3 - 6 seconds
      • Ageing resistant, universal adhesive for rubber, metal, plastics and natural rubber
    • 1C acrylate adhesive
    • Viscosity: ca. 3000 mPas
    • Fully cure in UV light with wavelength of 300 - 400 nm
    • Bubble-free bonding of different materials
    • Excellent resistance to media and heat
    • For the fixture of screws in their delivered condition / no pre-cleaning necessary
    • Max. thread diameter: M 36
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Effective cleaning, degreasing and dissolving of old impurities
      • Long lasting conservation of cleaned contacts
      • Prevention of electricity loss and disturbances
    • Bonds different composites
    • Possible materials are metal, ABS, polycarbonates, PMMA, Hart -PVC, GFK, CFK and other composites like wood or glass
    • Mild, pleasantly fresh scented hand cleaner
    • Application areas: workshops, body shops and industrial companies
    • Ph-neutral and free of solvents
    • high resistance to temperature: -50 °C to +180 °C (shortly up to +240 °C)
    • resistant to effects of weather-/ UV radiation and aging
    • above average curing rate, skin formation and tack free time
    • Metal frame
    • For 50 ml cartridge
    • Mixing ratio 1:1
    • Colour: black
    • Temperature resistance : -40 °C to +100 °C, shortly up to +180 °C
    • Elastic and moisture-curing adhesive and sealant for assembly and construction
    • UV stable
    • Free of isocyanates, solvents and silicones
    • Quick curing in less than 5 seconds
      • For rubber, metal and plastics
      • Universally applicable
    • Excellent resistance to media and heat
    • Fast curing, also on stainless steel and passive surfaces
    • Max. thread diameter: M 36
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -55 °C to +150 °C
    • 2-components system for finishing of imperfections and damages on metallic surfaces
    • good mechanical properties, impeccable possibility to be processed after curing
    • curing at room temperature or an accelerated curing by temperature addition
    • very good stability with a short stringing
    • excellent adhesion in combination with a primer on glass, glass with ceramic layering and on coated surfaces
    • Manual
    • Aluminium alloy and plastic case, impact-resistant
    • For 400 ml cartridge
    • Mixing ratio 1:1
    • Strong and sensitive foam cleaning agent
      • Excellent and stainless removal of stains and persistent impurities
      • Long term maintenance of plastics, upholstery and many more
    • Quick curing in less than 7 seconds
      • For porous surfaces made of plastic, wood, rubber, metal, cork and ceramic
      • No running of small drops
    • Medium-strength, universal product, which is suited for fine threads and can be dismantled afterwards using normal tools
    • Max. thread diameter: M 12
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -55 °C to +150 °C
    • excellent resistant to effects of weather
    • extremely fast reaction time
    • outstanding gap bridging
    • stable; perfectly suited for vertical applications
    • Manually formable, putty-like repair compound
    • Easy bonding of any kind - even under water
    • Processing time: 3 - 4 minutes
    • Especially suited for metal surfaces
      • Excellent, thorough and extremely fast cleaning
      • Generates a very clean surface
    • Pneumatic
    • Aluminium alloy and plastic case, impact-resistant
    • For 400 ml cartridge
    • Mixing ratio 1:1
    • Delayed curing
      • gap bridging, for porous surfaces made of plastic, wood, rubber, metal, cork and ceramic
      • Readjusting possible
    • Reliable fixture of stay bolts
    • Difficult to dismantle using normal tools
    • Max. thread diameter: M 36
    • Tangible after approx. 10 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Residue-free removal of dirt
      • Excellent, thorough and extremely fast cleaning
      • Generates a very clean surface
    • Colour: white
    • Temperature resistance : -40 °C to +90 °C (45 minutes to +180 °C); 30 minutes to +200 °C)
    • Elastic and moisture-curing adhesive and sealant for assembly and construction
    • UV stable
    • Free of isocyanates, solvents and silicones
    • versatile contact adhesive
    • flexible curing times
    • excellent adhesion on various materials
    • Manually formable, putty-like repair compound
    • Especially for wood and wooden composites
    • Processing time: approx. 4 - 5 minutes
    • Manual
    • Aluminium alloy and plastic case, impact-resistant
    • For 490 ml cartridge
    • Mixing ratio 10:1
    • Delayed curing
      • gap bridging, for porous surfaces, wood, cork, ceramic, rubber and plastic
      • Readjusting possible
    • For the fixture of screws in their delivered condition
    • Especially suited for highly stressed bonds like stay bolts, ball bearings and rolling bearings
    • Difficult to dismantle
    • Max. thread diameter: M 20
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Highly concentrated and strong universal cleaner
      • Mild formulation and especially low consumption rate
      • Outstanding suitability for highly sensitive surfaces
    • for universal contact bonding
    • excellent initial adhesion
    • outstanding resistance to temperature
    • Manually formable, putty-like repair compound
    • Excellent resistance oil, gasoline, water and many chemicals
    • Processing time: 3 - 4 minutes
    • Made of impact-resistant plastic
    • For 50 ml cartridge
    • Mixing ratio 2:1
    • Multifunctional, solvent-based, sprayable sealant
    • 1-component, MS Polymer-based, elastic, moisture-curing material
    • Thin-layered sealing of seams, overlaps and folds
    • Capillary properties
      • Quick curing within 1 - 3 seconds
      • For plastic, natural rubber, (foam-) rubber soft and plastic
      • Low liability to humidity
    • Gel-like, two-component super glue
    • Gap-filling
    • Technology-typical, above average viscosity
    • Especially suited for highly stressed bonds like stay bolts, ball bearings and rolling bearings
    • Difficult to dismantle
    • Max. thread diameter: M 20
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Thorough cleaning of machine parts covered heavily in dirt and oil
      • Extremely high cleaning power
      • Fast, easy and residue-free removal of grease, oil and resin
    • Manually formable, putty-like repair compound
    • Excellent resistance to oil, gasoline, water and many chemicals
    • Processing time: 3 - 4 minutes
    • 1-component, MS Polymer-based, elastic adhesive
    • For bonding of mirrors, natural stone, gypsum, different plastics etc.
    • Fast-curing
    • High-strength
    • Free of isocyanates and silicones
    • Pneumatic
    • Material: Aluminium alloy and plastic case, impact-resistant
    • For 490 ml cartridge
    • Mixing ratio 10:1
    • Fast curing within 2 - 4 seconds
      • For plastic, rubber and metal
      • Low liability to effects of humidity
    • Especially suited for highly stressed bonds like the protection and sealing of screws, stay bolts, nuts, thread inserts and screw plugs
    • Max. thread diameter: M 36
    • Tangible after approx. 20 - 40 minutes
    • Temperature resistance: -50 °C to + 200 °C
    • Colour: black
    • Temperature resistance : -30 °C to +100 °C, shortly up to +120 °C
    • Accelerated, elastic and moisture-curing construction adhesive
    • Free of isocyanates, solvents and silicones
    • Highly efficient foam cleaner for displays and sensitive surfaces
      • Generates a brilliant picture
      • Also suited for lenses, cameras, eyeglasses
    • Metal frame
    • For 400 ml cartridge
    • Mixing ratio 10:1
    • Polyurethane-based adhesive for repairing and putting
    • Extreme resistance to effects of weather and aging
    • Ability to be finished (grinding, drilling, cutting) and re-varnished
    • Quick curing within 2- 4 seconds
      • For absorbing materials, leather, cardboard, cork, wood, foam, plastic, elastomers and metals
      • Low liability to humidity
    • Especially suited for highly stressed bonds like the protection and sealing of screws, stay bolts, nuts, thread inserts and screw plugs
    • Max. thread diameter: M 36
    • Tangible after approx. 20 - 40 minutes
    • Temperature resistance: -50 °C to + 200 °C
    • Colour: grey
    • Temperature resistance : -30 °C to +100 °C, shortly up to +120 °C
    • Accelerated, elastic and moisture-curing construction adhesive
    • Free of isocyanates, solvents and silicones
    • Gentle removal of paint, varnish, seal and glued residues
      • Excellent cleaning ability
      • Easy and fast removal of oil, resin, grease, tar an residues of lubricants
    • Metal frame
    • For 400 ml cartridge
    • Polyurethane-based adhesive for repairing and putting
    • Extreme resistance to effects of weather and aging
    • Ability to be finished (grinding, drilling, cutting) and re-varnished
    • Quick curing within 2 - 4 seconds
      • Thixotropic
      • For absorbing materials, leather, cardboard, cork, wood, foam, plastic, elastomers and metals
      • Low liability to humidity
    • Especially suited for highly stressed bonds like the protection and sealing of screws, stay bolts, nuts, thread inserts and screw plugs
    • Max. thread diameter: M 36
    • Tangible after approx. 10 - 15 minutes
    • Temperature resistance: -50 °C to +200 °C
    • Colour: white
    • Temperature resistance : -30 °C to +100 °C, shortly up to +120 °C
    • Accelerated, elastic and moisture-curing construction adhesive
    • Free of isocyanates, solvents and silicones
    • High-performance bonding of different materials
    • Resistant to impact and peeling
    • Excellent finishing
    • Perfectly maintains and seals all stainless steel surfaces and coated surfaces
      • Generates a permanent protective coating
      • Long lasting protection against corrosion and oxidation
    • Quick curing within 2 - 4 seconds
      • For porous surfaces and absorbing materials – universally applicable
      • For ceramic, rubber, metal and plastic
      • Low liability to humidity
    • The product is able to penetrate micro-porosities and hairline cracks
      due to its capillary action and reliably seals die-cast chassis and welding seams
    • Protection afterwards possible
    • Max. thread diameter: M 5
    • Tangible after approx. 10 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Dry and non-contact cleaning by means of compressed air
      • Perfectly suited for sensitive surfaces
      • Quick cleaning of inaccessible spots and corners
    • Metal frame
    • For 380 ml coaxial cartridge
    • Mixing ratio 10:1
    • High-performance bonding of different materials
    • Resistant to impact and peeling
    • Excellent finishing
    • Delayed curing
      • gap bridging, for porous surfaces, wood, cork, ceramic, rubber and plastic
      • High-flexible bond
    • 1-component cleaner and primer for adhesion optimisation of MS Polymer-based sealants
    • Seals and closes all kinds of screw connections
    • Follow-up product to 02K70
    • Especially adjusted for high oil tolerance
    • Max. thread diameter: M 20
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Lasting conservation of metals and plastics
      • For painted surfaces
      • High penetrability and long-lasting protection against corrosion
    • High-performance bonding of different materials
    • Resistant to impact and peeling
    • Excellent finishing
    • Compressed air dispensing gun
    • For 380 ml coaxial cartridge
    • Mixing ratio 10:1
    • Adhesion optimisation of MS Polymer-based sealants
    • On various surfaces
    • As well as various coating systems on sealants
    • Delayed curing
      • Black, rubber-filled adhesive
      • Ideal for rubber, plastic and metal
      • Flexible, resistant to impact and peeling
      • Low liability to vibration
    • Especially suited for the sealing of conical / cylindrical pipe screw connections with Withworth-threads
    • Max. thread diameter: M 80
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • With possibility to add anti coast brake- work with or without anti coast brake ad libitum
    • High thrust
    • For 290 ml and 310 ml cartridges
    • Perfectly suited to fufill high demands during assembly and construction as well as during smaller industrial applications
    • Bonds composite materials, thermoplastics, duroplastics and metals
    • Develops a high-strength and inflexible connection between most diverse materials
    • Adhesion optimisation on various plastics, especially polypropylene (PP)
    • Quick curing
      • Odourless – non-blooming
      • For model construction and fine-pored Styrofoam
    • Waterproof and breathable
      • Lasting protection of the original paint of fabrics and leather
      • Protection against mould
    • Especially suited for the sealing of conical / cylindrical pipe screw connections with Withworth-threads
    • Max. gap filling ability: 0,3 mm
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • 2-component, strain hardening adhesive for metal and thermoplastic synthetics.
    • High impact and peel strength
    • Replaces numerous mechanical connection and fixing methods
    • Tubular bag dispensing gun
    • Continuous adjustable working pressure on the sealant gun
    • For 600 ml tubular bags
    • Capillary adhesive
      • Quick curing
      • Odourless – non-blooming
      • For model construction and fine-pored Styrofoam
    • Excellent protection during the welding procedure
      • Prevents the sticking of weld splatter
      • Extends the service life of gas and contact nozzles
    • Especially suited for the sealing of conical / cylindrical pipe screw connections with Withworth-threads
    • Max. gap filling ability: 0,35 mm
    • Tangible after approx. 10 - 20 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Excellent protection against corrosion and seizing
      • Perfect lubrication of heavily stressed antifriction surfaces
      • Temperature range: -40 °C to +1.100 °C
    • Aluminium alloy case
    • For 250 ml cartridges
    • Mixing ratio 10:1
    • 2C methacrylate adhesive for high-strength structural bonds
    • Very high elongation
    • Above-average gap filling ability
    • Delayed curing
      • Odourless – non-blooming
      • For model construction and fine-pored Styrofoam
      • For porous surfaces
    • Vibration, corrosion and temperature resistance to common industrial media
    • Max. gap filling ability: 0,2 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -50 °C to +200 °C
    • Increases operating life of machining tools
      • Biodegradable
      • Low consumption rate
    • 2C methacrylate adhesive for high-strength structural bonds
    • Very high elongation
    • Above-average gap filling ability
    • Material: Plastic
    • Colour: black
    • Quick curing in less than 6 seconds
      • For temperature resistant bonding of plastic, metal and rubber
      • Temperature resistance up to +125°C
    • For sealing of pneumatic and hydraulic screw connections
    • Very good chemical resistance
    • Max. thread diameter: M 26
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • High capillary action and excellent adhesive strength
      • Excellent long-term resistance to water
      • Temperature resistance: -40 °C to +150 °C
    • Developed for special applications
    • Extremely moisture resistant
    • Temperature resistance up to +120°C
    • 2-component, polyurethane-based adhesive
    • Quick functional hardness at room temperature
    • Serves as a fast fixation of wooden composites
    • For the fixture of bearings, sockets and cases in their delivered condition
    • Especially for small gap filling abilities
    • Max. gap filling ability: 0,15 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -50 °C to +150 °C
    • Fast and easy loosening of seized connections like screws, nuts and bolts
      • Reliable protection against corrosion
      • Prevention of squeaking and creaking
    • Delayed curing / Readjustment possible
      • For bonding of plastic, metal and rubber, which are resistant to impact, dynamic and temperature resistant up to +120°C
      • Great gap bridging ability
    • For the fixture of bearings, sockets and cases in their delivered condition
    • Suitable for passive composites and for applications where maximum resistance to hot oil is required
    • Max. gap filling ability: 0,15 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -50 °C to +150 °C
    • Reliable protection against oxidation and corrosion
      • Waterproof and antistatic
      • Temperature resistance: -40 °C to +150 °C
    • Delayed curing
      • Non-dripping – therefore perfectly suited for vertical surfaces and porous materials, metals, ceramic, wood and cork
      • Readjusting possible
      • Max. gap after bonding: 0,25 mm
    • Secures cylindrical parts in sliding seats with highest strength
    • Extreme resistance to high temperatures
    • Max. gap filling ability: 0,2 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -50 °C to +200 °C
    • Invisible lubrication film with high capillary action
      • Effective prevention of corrosion and abrasive wear
      • Temperature resistance: -30 °C to +150 °C
    • Non-blooming
      • Application: at suboptimal environmental conditions, thick adhesive layers, bonding of inactive materials or for the curing of leaked adhesives
    • Fast-drying, universal product with high strength for static shear stress and dynamic stress
    • Max. gap filling ability: 0,30 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -50 °C to +150 °C
    • Excellent lubricity and penetrability
      • Free of resin, silicone and acid
      • High pressure resistance and temperature range: -30 °C to +260 °C
  • Supports bonding of difficult plastics like polyethylene(PE), polypropylene(PP), PTFE and thermoplastics

    • Heat resistant, slowly curing, universal product for the fixture of cylindrical joint partners with press or shrink fit
    • Max. gap filling ability: 0,15 mm
    • Tangible after approx. 25 - 40 minutes
    • Temperature resistance: -50 °C to +180 °C
    • Lasting lubrication of chains, joints and couplings
      • Long-term protection against corrosion
      • Excellent penetrability
  • Removes adhesive residues easily. Material must be tested for compatibility before usage

    • Universal products for the fixture of bearings within sockets as well as wheels on shafts
    • Reliable replacement of mechanical security elements like feather keys or wedges
    • Max. gap filling ability: 0,15 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -40 °C to +180 °C
  • Filler for padding of holes, joints and gaps in combination with CA-adhesives. Universally suited for most materials

    • Temperature resistance: -190 °C to +260 °C
      • Reliable prevention of wearing
      • Prevention of jamming, friction, squeaking and creaking
    • Fast-curing, universal product for cylindrical connections
    • High resistance to acids and bases
    • Max. gap filling ability: 0,25 mm
    • Tangible after approx. 5 - 10 minutes
    • Temperature resistance: -50 °C to +200 °C
    • Excellent lubrication for assembly and effective protection against corrosion
      • Temperature resistance: up to 1.100°C
      • Prevents galling burning-in and seizing
    • Material: Plastic
    • Narrow outlet for precise dosing and working
    • Colour: transparent
    • Seals against water, compressed air, gas, gasoline and GPL
      -Perfectly suited for worn out ball bearings
    • Max. gap filling ability: 0,3 mm
    • Tangible after approx. 10 - 15 minutes
    • Temperature resistance: -50 °C to +150 °C
    • Fast-drying, extremely abrasion-proof protection against corrosion
      • Suited for all ferrous metals
      • Creates surfaces with a high degree of gloss
    • Material: Plastic
    • Fine, bent nozzle for precise dosing and working
    • Colour: transparent
    • Resistant to temperature, impact and vibration
    • Extremely high resistance to water, gas, oil, LPG and technical chemicals
    • Max. gap filling ability: 0,30 mm
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +200 °C
    • Material: Plastic
    • Long outlet (approx. 13 cm)
    • Colour: transparent
    • Perfect repair of stainless steel parts
      • High degree of gloss
      • Extremely high adhesive strength and resistance to abrasion
    • Non-dripping
    • Perfectly suited for working overhead and vertical surfaces
    • For sealing of form-stable flange connections as well as aluminium and different material combinations
    • Max. gap filling ability: 0,40 mm
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Material: Plastic
    • Colour: white/transparent / Connection: grey
    • Mixing ratio: 1:1 / 2:1
    • Fast-drying protection against corrosion
      • Perfect repair of damaged zinc coatings
      • Temperature resistance: up to +200°C (shortly up to +300°C)
    • For sealing of metallic threaded parts and smooth pair formation
    • Replaces all kinds of flange sealing
    • Max. gap filling ability: 0,35 mm
    • Tangible after approx. 10 - 20 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Material: Plastic
    • Colour: white/transparent
    • suited for injection mortar
    • Fast-drying protection against corrosion with excellent adhesive strength
      • High degree of gloss due to high metal portion
      • Temperature resistance: up to +250 °C (shortly up to +500 °C)
    • Fast-curing
    • For sealing of flanges and areas
    • Slightly flexible sealant film
    • Max. gap filling ability: 0,35 mm
    • Tangible after approx. 5 - 15 minutes
    • Temperature resistance: -55 °C to +150 °C
    • Material: Plastic
    • Colour: white/transparent / Connection: white
    • Mixing ratio: 1:1 / 2:1
    • Excellent protection against corrosion for metallic surfaces
      • High metal portion
      • Excellently suited for all ferrous metals
    • Especially suited for anaerobic products
      • Support of fast curing with inactive materials
    • Material: Plastic (PP)
    • Colour: green/transparent / Connection: white
    • Mixing ratio: 1:1 / 2:1
    • Fast-drying protection against corrosion for metallic surfaces
      • Temperature resistance: up to +500°C
      • 99% zinc purity
    • Extremely fast and effective cooling down of max. -45°C
      • Mode of operation: cools down - freezes - shrinks
      • Easy error search in case of thermal disruptions
    • Material: Plastic
    • Colour: orange/transparent / Connection: orange
    • Mixing ratio: 4:1 / 10:1
    • Conventional protection / marking lacquer as removable SICHERUNG as well as protection against external intervention
      • Flash off time: depending on layer thickness --> 10 seconds at 20°C
    • Material: Plastic (PP)
    • Colour: green/transparent, Connection: orange
    • Mixing ratio: 4:1 / 10:1
    • Free of silicone and grease
      • Very fast loosening of rusted and seized up screw connections
      • Completely residue-free results
    • Conventional protection / marking lacquer as removable SICHERUNG as well as protection against external intervention
      • Flash off time: depending on layer thickness --> 10 seconds at 20°C
    • Effortless detection and easy control of leaky spots
      • Temperature range: 0°C to +50°C
      • Non-flammable and non-corrosive
    • Material: Plastic (PP)
    • with internal thread
    • Colour: green/transparent
    • Mixing ratio: 1:1 / 2:1
    • Material: Plastic
    • Colour: orange/transparent
    • Mixing ratio: 10:1
    • Fast loosening of corroded or seized up connections
      • Reliable protection against corrosion
      • Excellent cleaning and maintenance effect
    • Transparent
      • Extremely high initial adhesion
      • Excellently suited for porous materials
      • Suited for assembly and contact bonds
    • Fast, strong and reliable initial adhesion
      • Low odour and transparent
      • Excellently suited for porous materials