No results were found for the filter!
SUPER GLUE PRIMER - Quick and easy application
- More application possibilities of CA-adhesives
- Higher strength of such difficult to adhere plastics
SUPER GLUE FILLER - Filler for filling holes, joints and gaps in combination with CA adhesives.
- Universal suitability for most materials
CONTACT ADHESIVE - Flexible open time
- Phenol and toluene free
- Low pressure required for joining
- Short pressing time required after flash-off
- Temperature resistance from -40 °C to +110 °C
- Easy to spread
- Not suitable for polypropylene, polyethylene, polystyrene and soft PVC
ULTIMATE ELONGATION - Outstanding stretch and mechanical properties
- For elastic bondings and sealants in different areas of application
- Less hazardous to health by using aliphatic isocyanates
- High stability
- Easy smoothing and modeling
- Can be sanded despite elasticity
- Weatherproof and moisture resistant
- Long-term overpainting and overcoating after solid skin formation
02K22UF - Universal product with medium viscosity for easily dismantled screwed joints
- Max. Thread diameter: M 36
- Hand-tight after approx. 5 - 15 minutes
- Temperature resistance: -55 to +180 °C
- Viscosity: 800 - 1,500 mPas
02K41UF - Secured screws moderately difficult to dismantle with tools
- Max. Thread diameter: M12
- Hand-tight after approx. 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 300 - 700 mPas
02K42UF - Secured screws moderately difficult to dismantle with tools
- Max. Thread diameter: M36
- Hand-tight after 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 1,500 - 4,000 mPas
02K45UF - Secured screws moderately difficult to dismantle with tools
- Max. Thread diameter: M80
- Hand-tight after approx. 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 2,500 - 6,000 mPas
02K90UF -
Capillary effect: Product can penetrate into thread interstices
- Max. Thread diameter: M6
- Hand-tight after approx 40 - 60 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 10 - 20 mPas
02K43UF - DVGW approval (DIN EN 751-1 Class H)
- Max. Thread diameter: M36
- Handling Cure Time 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 1,500 - 4,000 mPas
02K62UF - High-strength securing of bolted joints
- Max. thread diameter: M25
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 1.500 - 3.000 mPas
Viewed
