Methylmethacrylate

Methyl methacrylates

ACRYLATE CLEAR

Crystal-clear results for structural, high-strength bonding
For transparent, optically sophisticated bonding of plastics, especially PMMA (Plexiglas®), metals and composites
Fast working due to 1-2 min open time and hand strength after 4-5 min
Zero gap bonding possible
Quick and easy application without primer
Odor-reduced formula
Very good resistance to UV radiation, salt/water and chemicals
Thixotropic properties
Easy application even on uneven surfaces
Excellent media resistance
Outstanding resistance to material fatigue, shock and mechanical factors
Excellent post-processing properties: sanding, drilling and recoating

Adapter-Kit 10:1 for DPM50P_1_1_MS

Colour: red
For 50 ml cartridges
Mixing ratio 10:1

INDUSTRIAL FAST CLEANER

Completely residue-free
Leaves no film behind and absolutely non-corrosive
Evaporates quickly
Removes traces of moisture on metal surfaces

MANUAL DISPENSING GUN, FOR 50 ML, 1:1

Jecking rods made of metal
Colour: red/black
For 50 ml cartridges
Mixing ratio 1:1
Convertible for mixing ratio 2:1 and 10:1 by additional adapter kits

MANUAL DISPENSING GUN, METAL, FOR 400 ML CARTRIDGE, 1:1

Metal frame
For 400 ml cartridge
Mixing ratio 1:1

MANUAL DISPENSING GUN, PLASTIC, FOR 250 ML, 10:1

Aluminium alloy case
For 250 ml cartridges
Mixing ratio 10:1

MANUAL DISPENSING GUN, PLASTIC, FOR 50 ML, 1:1

Made of impact-resistant plastic
For 50 ml cartridge
Mixing ratio 1:1

MANUAL DISPENSING GUN, PLASTIC, FOR 50 ML, 10:1

Made of impact-resistant plastic
For 50 ml cartridge
Mixing ratio 1:1

MASTER 10 WHITE

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Processing time 10 minutes
Low shrinkage behaviour
High gap filling capacity (0,25 to 15 mm)
Above-average elongation properties (approx. 100 %)
High final strength even without pre-treatment
No tracing of the gluing spot
No dripping on vertical surfaces
Excellent chemical resistance and temperature resistance
High dynamic resistance to impact and stress

MASTER 15 BLACK

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Outstanding resistance to material fatigue, shock and mechanical factors
Processing time 15 minutes
Low shrinkage behaviour
High gap filling capacity (0.25 to 15 mm)
Above-average elongation properties (approx. 100%)
High final strength even without pre-treatment

MASTER 15 WHITE

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Processing time 15 minutes
Low shrinkage behaviour
High gap filling capacity (0,25 to 15 mm)
Above-average elongation properties (approx. 100 %)
High final strength even without pre-treatment
No tracing of the gluing spot
No dripping on vertical surfaces
Excellent chemical resistance and temperature resistance
High dynamic resistance to impact and stress

MASTER 30 BLACK

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Outstanding resistance to material fatigue, shock and mechanical factors
Processing time 15 minutes
Low shrinkage behaviour
High gap filling capacity (0.25 to 15 mm)
Above-average elongation properties (approx. 100%)
High final strength even without pre-treatment

MASTER 5 BLACK

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Outstanding resistance to material fatigue, shock and mechanical factors
For applications requiring fire resistance: fire protection approval HAZARD LEVEL HL 3
Processing time 5 minutes
Low shrinkage behaviour
High gap filling capacity (0.25 to 15 mm)
Above-average elongation properties (approx. 100%)
High final strength even without pre-treatment

MASTER 5 WHITE

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Processing time 5 minutes
Low shrinkage behaviour
High gap filling capacity (0,25 to 15 mm)
Above-average elongation properties (approx. 100 %)
High final strength even without pre-treatment
No tracing of the gluing spot
No dripping on vertical surfaces
Excellent chemical resistance and temperature resistance
High dynamic resistance to impact and stress

MASTER 60 GREEN

Ideally suited for large are bonding
Processing time is 30 min
Lasting bonded joints even in difficult application environments
Bonding and sealing of interior and exterior vehicle components
Outstanding resistance to material fatigue, shock and mechanical factors

MASTER 90 GREEN

Ideally suited for large-area bonding
Processing time is 90 min
Lasting bonded joints even in difficult application environments
Bonding and sealing indoors and outdoors
Outstanding resistance to material fatigue, shock and mechanical factors

MIXING NOZZLE MX B QUADRO™ 4:1 & 10:1, 9 cm

Material: plastic (PP)
Length mixer: 9 cm
Color: orange/transparent / connection: gray
Mixing ratio: 4:1 / 10:1
For 2C cartridges 25 ml, 45 ml and 50 ml

MIXING NOZZLE, 1:1 & 2:1, F-connection, FOR 200 ML & 400 ML QUADRO

Material: Plastic
Colour: white/transparent / Connection: white
Mixing ratio: 1:1 / 2:1

MIXING NOZZLE, 1:1 & 2:1, F-connection, FOR 200 ML & 400 ML QUADRO, Set, BLOCK BOND

Material: Plastic
Colour: white/transparent / Connection: white
Mixing ratio: 1:1 / 2:1

MIXING NOZZLE, 1:1 & 2:1, FOR 200 ML & 400 ML, QUADRO SHORT

Material: Plastic
Colour: white/transparent / Connection: white
Mixing ratio: 1:1 / 2:1

MIXING NOZZLE, 1:1 AND 2:1, FOR 200 ML AND 400 ML

Material: Plastic
Colour: white/transparent / Connection: white
Mixing ratio: 1:1 / 2:1

MIXING NOZZLE, 3D-DYNAMIX, FOR 25 ML, 37 ML AND 50 ML

Material: plastic
Colour: freely selectable, one colour per set
Colours: transparent, black, red, blue, yellow, green

MIXING NOZZLE, 4:1 AND 10:1, FOR 250 ML AND 490 ML

Material: Plastic
Colour: orange/transparent / Connection: orange
Mixing ratio: 4:1 / 10:1

MIXING NOZZLE, 4:1 AND 10:1, FOR 250 ML AND 490 ML, QUADRO

Material: Plastic (PP)
Colour: green/transparent, Connection: orange
Mixing ratio: 4:1 / 10:1

MULTI CRAFT 2 BLACK

Ideal for vehicle construction, production and repair
Suitable for bonding materials with different thermal expansion coefficients
Bonding and sealing of interior and exterior vehicle components
Processing time 10 minutes
Low shrinkage behaviour
High gap filling capacity (0,25 to 15 mm)
Above-average elongation properties (approx. 100 %)
High final strength even without pre-treatment
No tracing of the gluing spot
No dripping on vertical surfaces
Excellent chemical resistance and temperature resistance
High dynamic resistance to impact and stress

MULTI POWER 10 BEIGE

High-performance bonding of different materials
Colour: beige
High resistance to shocks and peeling
Excellent finishing properties
Fast formation of mechanical properties allows for quick processing of elements to be bonded
Excellent resistance to environmental factors
High tensile shear strength, even in case of untreated metals
No need for priming or grinding on a variety of surfaces
Appropriate colour compatibility with various substrates

MULTI POWER 3 BEIGE

High-performance bonding of different materials
Colour: beige
High resistance to shocks and peeling
Excellent finishing properties
Fast formation of mechanical properties allows for quick processing of elements to be bonded
Excellent resistance to environmental factors
High tensile shear strength, even in case of untreated metals
No need for priming or grinding on a variety of surfaces
Appropriate colour compatibility with various substrates

MULTI POWER 3 BLACK

High-performance bonding of different materials
High resistance to shocks and peeling
Excellent finishing properties
Fast formation of mechanical properties allows for quick processing of elements to be bonded
Excellent resistance to environmental factors
High tensile shear strength, even in case of untreated metals
No need for priming or grinding on a variety of surfaces
Fits perfectly on black substrates

PLASTCOMET 20 ANTHRACITE

Suitable for a wide range of high-strength bonds subject to dynamic stress
Allows for compensation of production tolerances
Wide adhesion spectrum, e.g. from ABS to carbon fibre and aluminium
Appropriate colour compatibility with various substrates
No need for priming or grinding on a variety of surfaces
Fast formation of mechanical properties allows for quick processing of elements to be bonded
Stable rheology / viscosity adjustment
Excellent resistance to environmental factors
Styrene-free

PLASTCOMET 5 ANTHRACITE

High-performance bonding of different materials
Colour: beige
High resistance to shocks and peeling
Excellent finishing properties
Fast formation of mechanical properties allows for quick processing of elements to be bonded
Excellent resistance to environmental factors
High tensile shear strength, even in case of untreated metals
No need for priming or grinding on a variety of surfaces
Appropriate colour compatibility with various substrates

PNEUMATIC DISPENSING GUN, PLASTIC, FOR 490 ML, 10:1

Pneumatic
Aluminium alloy and plastic case, impact-resistant
For 490 ml cartridge
Mixing ratio 10:1

POLYPLAST 3 BEIGE

Two-component acrylic hybrid system
Colour: beige
Easy application and comfortable handling thanks to low viscosity
Outstanding moisture and media resistance
Ideal for materials with different thermal expansion coefficients
Easy application on uneven surfaces
Lasting bonded joints even in difficult application environments
Processing time 2 - 3 min
With spacers (glass beads)
Light, odourless, free of heavy metals and softeners

PREMIUM CASE - PROFESSIONAL & MASTER

1 x WELDYX® PROFESSIONAL 5 black in the 50 ml cartridge
1 x WELDYX® PROFESSIONAL 15 black in a 50 ml cartridge
1 x WELDYX® MASTER white 5 in the 50 ml cartridge
1 x WELDYX® MASTER white 15 in the 50 ml cartridge
1 x WELDYX® CLEANER high performance cleaner 400 ml spray can
12 x Mixing nozzle MX B QUADRO™ 4:1 & 10:1, 9 cm
1 x Manual dispensing gun DG MANUELL 50 ml, 1:1. 10:1, PLASTIC, convertible
2 x Flyer product overview with QR codes to the respective data sheets

PROFESSIONAL 15 BLACK

Ideal for vehicle construction, production and repair
Lasting bonded joints even in difficult application environments
Bonding and sealing of interior and exterior vehicle components
Outstanding resistance to material fatigue, shock and mechanical factors
For applications requiring fire resistance: fire protection approval HAZARD LEVEL HL 3
ISEGA approval for direct food contact
Low shrinkage behaviour
High gap filling capacity (0.25 to 10 mm)
Above-average elongation properties (approx. 100 %)

PROFESSIONAL 5 BLACK

Ideal for vehicle construction, production and repair
Lasting bonded joints even in difficult application environments
Bonding and sealing of interior and exterior vehicle components
Outstanding resistance to material fatigue, shock and mechanical factors
For applications requiring fire resistance: fire protection approval HAZARD LEVEL HL 3
ISEGA approval for direct food contact
Low shrinkage behaviour
High gap filling capacity (0.25 to 10 mm)
Above-average elongation properties (approx. 100 %)

Brands

Products

Development

Container

Contract Filling

Private Label

Company

Infocenter