ANAEROBIC ACTIVATOR - Accessories
106030
VPE
12
Properties
| Content | 200ml |
|---|---|
| Packaging | can |
| Shelf life | 12 months |
| Substrates | metal, Composite, Plastic |
| Processing time | Quick (1-5 min) |
| Accessory type | Activators |
Downloads
Blog Posts
WIKO® ANAEROBIC ACTIVATOR accelerates the curing of anaerobic adhesives and sealants and ensures consistently best adhesive results.
DIts use is necessary in suboptimal environmental conditions, such as cold, low humidity and thick layers of adhesive. Pretreatment with the adhesive activator is also recommended when bonding highly absorbent and porous surfaces as well as inactive materials.
Pre-treatment with the activator causes the adhesive to harden significantly faster. The time until hand strength is achieved is shortened by approx. 20 - 120 seconds - depending on the adhesive chosen, the gap and the room temperature.
In addition, the activator is also used after bonding to immediately harden and easily remove adhesive that has accidentally and unintentionally dripped onto surfaces.
FEATURES
- Acceleration of the reaction of anaerobic adhesives
- Supports rapid curing of inactive materials
- Higher occupational safety: Free of DMPT, therefore less toxic and still available for sale after September 2025.
- Optimal spray pattern and low reaction odor
- Recommended processing temperature: +10 °C to +30 °C
- Spray distance: 30 cm
