Vehicle construction

• Quick-drying, smooth, non-porous surface film
• Excellent suitability for all ferrous metals
• High adhesion and high abrasion resistance
• High resistance to dirt and water
• High level of gloss
• Matching color with freshly galvanized metals
• Easy to weld through due to high metal content
• Can be painted over without further priming

Other container sizes available on request.

• Quick-drying, smooth and non-porous surface film
• High level of gloss
• High abrasion resistance
• Temperature resistance: up to +200 °C (short-term up to +300 °C)

Other container sizes available on request.

• Quick-drying corrosion protection for metallic surfaces
• Spot weldable and electrically conductive
• Heat resistant up to +500 °C
• 99% zinc purity

Other container sizes available on request.

• Sustainable lubrication of chains, joints and couplings
• Permanent protection against corrosion
• Excellent creep and gap penetration ability
• Temperature range: -35 °C to +200 °C

Other container sizes available on request.

• Powerful removal of stuck-on residue
• Hassle-free, quick removal of oil, resin, grease, tar, lubricant and lubricant residues

Other container sizes available on request.

• Uncompromising cleaning. Removal and solution of old dirt
• Sustainable preservation of cleaned contacts
• Avoiding power loss and disruption
• Excellent infiltration and displacement of water
• Excellent suitability for sensitive components and connections
• Free from CFCs, HCFCs and halogen-containing solvents
• Bottled with carbon dioxide as a propellant

 Other container sizes available on request.

• Excellent assembly lubrication and effective corrosion protection
• Prevention of seizing, burning or rusting
• Enables an optimal ratio of screw tightening torque to screw preload and allows non-destructive dismantling
• Temperature range: -30 °C to +1,100 °C

Other container sizes available on request.

• Easy control of leaks
• Anti-corrosive and non-flammable
• Temperature range: 0 °C to +50 °C

Other container sizes available on request.

• Ideal for vehicle construction, production and repair
• Bonding of materials with different thermal expansion coefficients
• Bonding and sealing of interior and exterior vehicle components
• Fire resistance application: fire protection clearance
• HAZARD LEVEL HL 3
• Processing time 10 minutes
• Low shrinkage behavior
• High gap filling capacity (0.25 to 15 mm)
• Above-average stretch properties (approx. 100%)
• High final strength even without pretreatment
• No tracing of the glued area
• No running off on vertical surfaces
• Excellent resistance to high temperatures and many chemicals
• High dynamic shock and vibration resistance

• Ideal for vehicle construction, production and repair
• Bonding of materials with different thermal expansion coefficients
• Bonding and sealing of interior and exterior vehicle components
• Excellent resistance to fatigue, shock and impact
• Fire resistance application: fire protection clearance
• HAZARD LEVEL HL 3
• Processing time 15 minutes
• Low shrinkage behavior
• High gap filling capacity (0.25 to 15 mm)
• Above-average stretch properties (approx. 100%)
• High final strength even without pretreatment

• Ideal for vehicle construction, production and repair
• Bonding of materials with different thermal expansion coefficients
• Bonding and sealing of interior and exterior vehicle components
• Fire resistance application: fire protection clearance
• HAZARD LEVEL HL 3
• Processing time 15 minutes
• Low shrinkage behavior
• High gap filling capacity (0.25 to 15 mm)
• Above-average stretch properties (approx. 100%)
• High final strength even without pretreatment
• No tracing of the glued area
• No running off on vertical surfaces
• Excellent resistance to high temperatures and many chemicals
• High dynamic shock and vibration resistance

• Ideally suited for large-area bonding
• Open time is 30 minutes
• Permanent adhesive connections even in difficult application environments
• Bonding and sealing indoors and outdoors
• Excellent resistance to material fatigue, shock and impact
• Low shrinkage behavior
• High gap filling capacity (0.25 to 10 mm)
• Above-average stretch properties (approx. 100%

• Ideal for vehicle construction, production and repair
• Bonding of materials with different thermal expansion coefficients
• Bonding and sealing of interior and exterior vehicle components
• Excellent resistance to fatigue, impact and
• impact
• Fire resistance application: fire protection clearance
• HAZARD LEVEL HL 3 
• Processing time 5 minutes
• Low shrinkage behavior
• High gap filling capacity (0.25 to 15 mm)
• Above-average stretch properties (approx. 100%)
• High final strength even without pretreatment

• Ideal for vehicle construction, production and repair
• Bonding of materials with different thermal expansion coefficients
• Bonding and sealing of interior and exterior vehicle components
• Fire resistance application: fire protection clearance
• HAZARD LEVEL HL 3
• Processing time 5 minutes
• Low shrinkage behavior
• High gap filling capacity (0.25 to 15 mm)
• Above-average stretch properties (approx. 100%)
• High final strength even without pretreatment
• No tracing of the glued area
• No running off on vertical surfaces
• Excellent resistance to high temperatures and many chemicals
• High dynamic shock and vibration resistance

• Ideally suited for large-area bonding
• Open time is 90 minutes
• Permanent adhesive connections even in difficult application environments
• Bonding and sealing indoors and outdoors
• Excellent resistance to material fatigue, shock and impact
• High gap filling capacity (0.25 to 10 mm)
• Above-average stretch properties (approx. 100%)

• Ideally suited for large-area bonding
• Open time is 60 minutes
• Permanent adhesive connections even in difficult application environments
• Bonding and sealing indoors and outdoors
• Excellent resistance to material fatigue, shock and impact
• High gap filling capacity (0.25 to 10 mm)
• Above-average stretch properties (approx. 100%)

• Especially for metal surfaces
• Excellent, extremely fast and deep pore cleaning
• Residue-free cleaning without any residual residue

Other container sizes available on request.

• Adhesion optimization of sealants based on MS polymers
• Good adhesion of WIKO® MS POLYMER products to metal, glass and plastics
• Fast drying time 
• Evaporation without leaving any residue

• Industrial adhesive for joining metals, plastics and composite materials 
• Processing time of 2 minutes, therefore particularly suitable for repairs
• Suitable for most automated industrial production processes
• Temperature resistant between -40 °C to +120 °C
• Increased elongation at break
• Tensile shear strength is up to 17 N/mm²
• Color after curing: black

• High-performance bonding of a wide variety of materials with and among each other
• Color: beige
• Impact and peel resistant
• Excellent post-processing
• Rapid development of mechanical properties enables the workpieces to be processed further in a timely manner
• Excellent resistance to environmental influences
• High tensile shear strength values, even on untreated metals
• No need for primers or sanding on a variety of surfaces
• Adequate color compatibility with various substrates

• High-performance bonding of a wide variety of materials with and among each other
• Impact and peel resistant
• Excellent post-processing
• Rapid development of mechanical properties enables the workpieces to be processed further in a timely manner
• Excellent resistance to environmental influences
• High tensile shear strength values, even on untreated metals
• No need for primers or sanding on a variety of surfaces
• Adequate color compatibility with various substrates

• High-performance bonding of a wide range of materials
• Impact and peel resistant
• Excellent post-processing
• Rapid development of mechanical properties enables the workpieces to be processed further in a timely manner
• Excellent resistance to environmental influences
• High tensile shear strength values, even on untreated metals
• No need for primers or sanding on one
• Variety of surfaces
• Color compatibility with black substrates

• Quickly and easily loosen tight connections such as screws, nuts and bolts
• Reliable protection against corrosion
• Elimination of squeaks and creaks

Other container sizes available on request.

• Good physical and electrical properties, with a high degree of stability
• Compatible with a wide range of substrates
• Quickly fuses under tension without the need for external heat or pressure
• Excellent resistance to water, UV rays and ozone
• Can be used for temporary isolation or protection