Adhesives

• No MEKO – free from butan-2-one oxime
• Meets GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Good adhesion to metals, including non-ferrous metals
• Particularly user-friendly: low odor and significantly less harmful to health
• Non-corrosive, weather/UV-resistant and age-resistant
• Above-average crosslinking speed, skin formation and tack-free time
• Resistance to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as refrigerants and antifreeze
• Uniform curing regardless of external influencing factors
• High resistance to oil and high temperatures

• No MEKO – free from butan-2-one oxime
• Meets GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Good adhesion to metals, including non-ferrous metals
• Particularly user-friendly: low odor and significantly less harmful to health
• Non-corrosive, weather/UV- and aging-resistant
• Above-average cross-linking speed, skin formation and tack-free time
• Resistant to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as coolants and antifreeze
• Uniform curing regardless of external influencing factors
• High resistance to oil and high temperatures

• No MEKO – free from butan-2-one oxime
• Complies with GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Good adhesion to metals, including non-ferrous metals
• Especially user-friendly: low-odor and significantly less harmful to health
• Non-corrosive, weather/UV-resistant and aging-resistant
• Above-average crosslinking speed, skin formation, and tack-free time
• Resistant to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as refrigerants and antifreeze
• Uniform curing regardless of external influencing factors
• High resistance to oil and high temperatures

• Crystal-clear results for structural, high-strength bonds
• For transparent, visually demanding bonding of plastics, especially PMMA (Plexiglas®), metals and composite materials
• Fast working thanks to 1–2 min open time and handling strength after 4–5 min
• Zero-gap bonding possible
• Simple and fast application without primer
• Odor-reduced formula
• Very good resistance to UV radiation, salt/water and chemicals
• Thixotropic properties
• Easy application even on uneven surfaces
• Excellent media resistance
• Resistance to material fatigue, impact and shock exposure
• Excellent post-processing properties: sanding, drilling and overpainting

• 1 x WELDYX® PROFESSIONAL 5 black in the 50 ml cartridge
• 1 x WELDYX® PROFESSIONAL 15 black in the 50 ml cartridge
• 1 x WELDYX® MASTER white 5 in the 50 ml cartridge
• 1 x WELDYX® MASTER white 15 in the 50 ml cartridge
• 1 x WIKO® INDUSTRIAL FAST CLEANER 400 ml spray can
• 12 x MIXING NOZZLE MX B QUADRO™ 4:1 & 10:1, 9 cm
• 1 x Manual dispensing gun DG MANUAL 50 ml, 1:1. 10:1, PLASTIC, convertible
• 2 x Flyer product overview with QR codes for the respective data sheets

• Quickly sandable – for accelerated work processes and shorter downtimes 
• Soft, moldable consistency – enables precise application and shaping 
• Can be reworked by drilling, sanding, cutting, and overpainting 
• Excellent resistance to media such as water, oil, fuel, solvents, as well as various acids and alkalis 
• Durable adhesive bonds: impact-resistant, weather-resistant, and age-resistant 
• Free of isocyanate requiring labeling – no isocyanate certification necessary 
• Not classified as “suspected of causing cancer” according to current legislation

• Quickly sandable – for accelerated work processes and shorter downtimes
• Soft, moldable consistency – enables precise application and shaping
• Can be reworked by drilling, sanding, cutting, and overpainting
• Excellent resistance to media such as water, oil, fuel, solvents, as well as various acids and alkalis
• Durable adhesive bonds: impact-resistant, weather-resistant, and age-resistant
• Free of isocyanate requiring labeling – no isocyanate certification necessary
• No classification as “suspected of causing cancer” according to current legislation

• Quick to sand over – for accelerated work processes and shorter downtimes
• Soft, moldable consistency – enables precise application and shaping
• Can be reworked by drilling, sanding, cutting, and overpainting
• Excellent resistance to water, oil, fuel, solvents, as well as various acids and alkalis
• Durable adhesive bonds: impact-resistant, weather-resistant, and age-resistant
• Free of labeling-required isocyanate – no isocyanate certification required
• No classification as “suspected carcinogen” according to current legislation

• High reactivity: Rapid assembly strength with high adhesive forces
• Wide gap-filling capacity
• Excellent curing properties
• Optimized time window between fixing time and assembly strength
• During curing: no damage to the workpieces to be bonded, no volume shrinkage
• Easy and quick to rework: sandable & overpaintable
• Suitable for indoor and outdoor use
• Moisture-resistant, frost-proof, weather- and aging-resistant
• High chemical resistance
• Supply exclusively to professional users

• Ideally suited for large-area bonding
• Open time is 90 min
• Permanent adhesive bonds even in challenging application environments
• Bonding and sealing for indoor and outdoor use
• Excellent resistance to material fatigue, impact, and shock exposure
• High gap-filling capacity (0.25 to 10 mm)
• Above-average elongation properties (approx. 100%)

• Ideally suited for large-area bonding
• Open time is 60 min
• Permanent adhesive bonds even in challenging application environments
• Bonding and sealing for indoor and outdoor use
• Excellent resistance to material fatigue, impact, and shock exposure
• High gap-filling capacity (0.25 to 10 mm)
• Above-average elongation properties (approx. 100%)

• Ideally suited for large-area bonding
• Open time is 30 min
• Permanent adhesive bonds even in demanding application environments
• Bonding and sealing indoors and outdoors
• Excellent resistance to material fatigue, impact, and shock
• Low shrinkage behavior
• High gap-filling capability (0.25 to 10 mm)
• Above-average elongation properties (approx. 100 %

• Industrial adhesive for bonding metals, plastics, and composite materials
• Working time of 2 min., therefore particularly well suited for repairs
• Suitable for most automated industrial production processes
• Temperature-resistant between -40 °C and +120 °C
• Increased elongation at break
• Tensile shear strength of up to 17 N/mm²
• Color after curing: black

• No labeling required
• Odorless – non-blooming
• Clean and nearly invisible bonds
• No corrosive effect on Styrofoam® used in model making
• Color: clear/colorless

• High-temperature-resistant bonding up to +120 °C
• Improved impact resistance
• Increased flexibility
• Color: clear/colorless

• High UV stability
• Good absorption of mechanical and acoustic vibrations and oscillations
• Certification according to the ISEGA declaration of safety is available on request

• High initial strength, rapid strength build-up, curing, and achievement of final strength
• Thixotropic, ideal for overhead applications
• Good UV, water, weather, moisture, and aging resistance.
• Non-corrosive on metals
• Weather-, saltwater-, and moisture-resistant
• Free of isocyanates, solvents, and silicones
• Dampens vibrations and oscillations
• Can be painted over after skin formation

• Fast curing in under 7 seconds
• Very high shelf stability
• Increased moisture resistance
• Clean, virtually invisible bonds

For absorbent materials, leather, cardboard, cork, wood, foam, plastic, elastomers, and metal

• Fast curing in under 7 seconds
• Very high storage stability
• Increased moisture resistance
• Clean, nearly invisible bonds
• For absorbent materials, leather, cardboard, cork, wood, foam, plastic, elastomers and metal

• Fast curing in under 7 seconds
• Very high storage stability
• Increased moisture resistance
• Clean, nearly invisible bonds
• For absorbent materials, leather, cardboard, cork, wood, foam, plastic, elastomers, and metal

• Ideally suited for vehicle construction, production, and repair
• Bonding of materials with different coefficients of thermal expansion
• Bonding and sealing of internal and external vehicle components
• Fire resistance application: fire protection approval
• HAZARD LEVEL HL 3
• Processing time 10 minutes
• Low shrinkage behavior
• High gap-filling capability (0.25 to 15 mm)
• Above-average elongation properties (approx. 100%)
• High final strength even without pretreatment
• No show-through of the bonded joint
• No sagging on vertical surfaces
• Excellent resistance to high temperatures and many chemicals
• High dynamic impact and vibration resistance

• Ideally suited for vehicle construction, production, and repair
• Bonding of materials with different coefficients of thermal expansion
• Bonding and sealing of interior and exterior vehicle components
• Fire resistance application: fire protection approval
• HAZARD LEVEL HL 3
• Processing time 5 minutes
• Low shrinkage behavior
• High gap-filling capability (0.25 to 15 mm)
• Above-average elongation properties (approx. 100%)
• High final strengths even without pretreatment
• No show-through of the bond line
• No running on vertical surfaces
• Excellent resistance to high temperatures and many chemicals
• High dynamic impact and vibration resistance

• Ideally suited for vehicle construction, production, and repair
• Bonding of materials with different coefficients of thermal expansion
• Bonding and sealing of interior and exterior vehicle components
• Fire resistance application: fire protection approval
• HAZARD LEVEL HL 3
• Processing time 15 minutes
• Low shrinkage behavior
• High gap-filling capacity (0.25 to 15 mm)
• Above-average elongation properties (approx. 100%)
• High ultimate strengths even without pretreatment
• No show-through of the bond line
• No running on vertical surfaces
• Excellent resistance to high temperatures and many chemicals
• High dynamic impact and vibration resistance

• Ideally suited for vehicle construction, production and repair
• Bonding of materials with different coefficients of thermal expansion
• Bonding and sealing of interior and exterior vehicle components
• Excellent resistance to material fatigue, impact and shock exposure
• Fire resistance application: fire protection approval
• HAZARD LEVEL HL 3
• Processing time 15 minutes
• Low shrinkage behavior
• High gap-filling capability (0.25 to 15 mm)
• Above-average elongation properties (approx. 100%)
• High final strengths even without pretreatment