Maintenance

• Has a noise-dampening effect
• Prevents jerky start-up
• Protects against corrosion and wear
• No embrittlement in cold conditions
• Also suitable for preserving wire ropes
• Tough-elastic and waterproof
• Dry lubricating film – does not attract dust
• Temperature-resistant: -30°C to +100°C; briefly up to +180

• Mower decks and discharge chutes become less clogged with cuttings
• Longer cleaning intervals
• Easier cleaning of the mower deck
• For snow blowers, snow discharge is improved

• Lubricates without stains and almost invisibly
• Penetrates rust and displaces moisture
• Loosens corroded connections
• Prevents leakage currents
• silicone-free
• Temperature-resistant from -50°C to +210°C

• Fast-drying, smooth, pore-free surface film
• Excellent suitability for all ferrous metals
• High adhesion and high abrasion resistance
• High resistance to dirt and water
• High gloss level
• Color-matched to freshly galvanized metals
• Can be welded through without problems due to high metal content
• Can be overcoated without additional primer

Additional container sizes available on request.

• Fast-drying, smooth and pore-free surface film
• High gloss level
• High abrasion resistance
• Temperature resistance: up to +200 °C (briefly up to +300 °C)

Additional container sizes available on request.

• Fast-drying corrosion protection for metallic surfaces
• Spot-weldable and electrically conductive
• Heat-resistant up to +500 °C
• 99% pure zinc

Additional container sizes available on request.

• Quick-drying, smooth film
• High adhesive strength
• Can be overpainted
• Heat-resistant up to +250 °C and for short periods up to +500 °C

Additional container sizes available on request.

• CA adhesive remover
• Effortless removal of adhesive residue

• Quick and easy application
• Greater range of applications for CA adhesives
• Higher strengths with plastics that are otherwise difficult to bond

• High-temperature-resistant bonding up to +120 °C
• Improved impact resistance
• Increased flexibility
• Color: clear/colorless

• High-temperature-resistant bonding up to +120 °C
• Improved impact resistance
• Increased flexibility
• Color: clear/colorless

• Developed for special applications
• High-temperature-resistant bonding up to +120 °C
• Improved impact resistance
• Increased flexibility
• Color: clear/colorless

• Gel-like texture
• Non-sagging - overhead work or work on vertical surfaces
• Gap-filling capacity of 0–5 mm
• Delayed curing
• Low shrinkage
• Above-average toughness
• Suitable for low-energy and porous substrates
• Mechanically workable
• Color: transparent

• Delayed curing
• Non-drip – therefore ideal for vertical surfaces and porous materials, metal, ceramic, wood, and cork
• Readjustment possible
• Color: clear/colorless

• Filler for filling holes, joints and gaps in combination with CA adhesives
• Universal suitability for most materials

• Acceleration of the reaction of instant adhesives
• Supports rapid curing on inactive materials
• Higher occupational safety: Free from DMPT, therefore less toxic and still freely saleable after September 2025.
• Optimal spray pattern and low reaction odor
• Compared to many competing products, clear and non-blooming
• Consisting of activator additive, solvents, and the propellant gas propane/butane

• Curing in <18 seconds
• Delayed curing
• For porous surfaces, wood, cork, ceramic, rubber, and plastics
• Highly flexible adhesive bond
• Color: transparent

• Delayed curing
• Black, rubber-filled adhesive
• Ideal for rubber, plastic and metal
• Flexible, impact-, shock- and peel-resistant
• Less susceptible to vibrations
• Color: black

• No labeling required
• Odorless – non-blooming
• Clean and virtually invisible bonds
• No caustic effect on Styrofoam® used in model making
• Color: clear/colorless

• Capillary properties
• Ultra-fast curing in 1–3 seconds
• For plastic, rubber, (foam) rubber, soft and plastic
• Low susceptibility to moisture
• Color: clear/colorless

• Fast curing in 1-3 seconds
• Thixotropic
• For absorbent materials, leather, cardboard, cork, wood, foam, plastic, elastomers and metal
• Low susceptibility to moisture
• Color: clear/colorless

• Fast curing in under 7 seconds
• Very high shelf stability
• Increased moisture resistance
• Clean, virtually invisible bonds

For absorbent materials, leather, cardboard, cork, wood, foam, plastic, elastomers, and metal

• Delayed curing
• Black, rubber-filled adhesive
• Ideal for rubber, plastic and metal
• Flexible, resistant to impact, shock and peeling
• Less susceptible to vibrations
• Color: black

• Fast curing in under 7 seconds
• Very high storage stability
• Increased moisture resistance
• Clean, nearly invisible bonds
• For absorbent materials, leather, cardboard, cork, wood, foam, plastic, elastomers, and metal