Automotive industry

• Acceleration of the reaction of anaerobic adhesives
• Supports rapid curing on inactive materials
• Higher occupational safety: Free of DMPT, therefore less toxic and still available for sale without restrictions after September 2025.
• Optimal spray pattern and low reaction odor
• Recommended processing temperature: +10 °C to +30 °C
• Spraying distance: 30 cm

• Fast-drying, smooth, pore-free surface film
• High surface gloss level
• Extremely high abrasion resistance
• Temperature resistance up to approx. +500 °C

Additional container sizes available on request.

• Can be painted over
• Anti-drumming effect
• High abrasion resistance
• Fast drying approx. 2-4 hrs.
• Suitable for all common substrates
• Good aging resistance
• Good permanent elasticity

Additional container sizes available on request.

• Can be painted over
• Anti-drumming effect
• High abrasion resistance
• Fast drying approx. 2–4 hrs.
• Suitable for all common substrates
• Good aging resistance
• Good permanent elasticity

Additional container sizes available on request.

• Can be painted over
• Anti-drumming effect
• High abrasion resistance
• Fast drying approx. 2–4 hrs.
• Suitable for all common substrates
• Good aging resistance
• Good permanent elasticity

Additional container sizes available on request.

• High reactivity for fast assembly strength with high adhesive forces
• Ideal for fast processes with high cycle rates

• Crystal-clear results for structural, high-strength bonds
• For transparent, visually demanding bonding of plastics, especially PMMA (Plexiglas®), metals and composite materials
• Fast working thanks to 1–2 min open time and handling strength after 4–5 min
• Zero-gap bonding possible
• Simple and fast application without primer
• Odor-reduced formula
• Very good resistance to UV radiation, salt/water and chemicals
• Thixotropic properties
• Easy application even on uneven surfaces
• Excellent media resistance
• Resistance to material fatigue, impact and shock exposure
• Excellent post-processing properties: sanding, drilling and overpainting

• Ideally suited for worn ball bearings
• PFAS-free
• Max. gap-filling capacity: 0.3 mm
• Hand-tight after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 200,000 - 600,000 mPas

• Particularly user- and environmentally friendly
• PFAS-free
• Without hazardous substance labeling
• Max. gap-filling capacity: 0.2 mm
• Handling strength after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 400 - 700 mPas

• Universal products for fastening bearings in bushings as well as wheels on shafts
• PFAS-free
• Reliable replacement for mechanical retaining elements such as feather keys or wedges
• Max. gap-filling capacity: 0.2 mm
• Hand-tight after: 20 - 30 minutes
• Service temperature range: -55 °C to +180 °C
• Viscosity: 400 - 700 mPas

• Especially user- and environmentally friendly
• PFAS-free
• No hazardous substance labeling
• Max. gap-filling capacity: 0.3 mm
• Handling strength after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 3,000 - 6,000 mPas

• DVGW approval (tested according to DIN EN 751-1 Class H)
• PFAS-free
• Resistant to vibration, corrosion, and temperature against common industrial media
• Max. gap-filling capacity: 0.2 mm
• Density: 1.13-1.17 g/ml
• Handling strength after: 5 -15 minutes
• Operating temperature range: -55 °C to +200 °C
• Viscosity: 5,000 - 12,000 mPas

• Max. gap size: 0.15 mm
• PFAS-free
• Hand-tight after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 100 - 200 mPas

• For fastening bearings, bushings, and sleeves as supplied
• PFAS-free
• Especially for small gaps
• Max. gap-filling capacity: 0.15 mm
• Hand-tight after approx. 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 100 - 200 mPas

• Particularly user- and environmentally friendly
• No hazardous substance labeling
• Max. thread diameter: M80
• Hand-tight after: 10 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 20,000 - 40,000 mPas

• Fast curing
• For sealing flanges and surfaces
• Slightly flexible sealant film
• Density: 1.09-1.13 g/ml
• Max. gap-filling capacity: 0.25 mm
• Tack-free after approx. 5 - 20 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 23,000 - 35,000 mPas

• Particularly user- and environmentally friendly
• Without hazardous substance labeling
• Density: 1.11-1.15 g/ml
• Opt. gap-filling capacity: 0.2 mm
• Handling strength after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 35,000 - 60,000 mPas

• Particularly user- and environmentally friendly
• Without hazardous substance labeling
• Max. thread diameter: M80
• Hand-tight after approx. 15 - 20 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 15,000 - 25,000 mPas

• For sealing pneumatic and hydraulic fittings
• PFAS-free
• Very good chemical resistance
• Max. thread diameter: M26
• Hand-tight after: 10 - 20 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 400 - 800 mPas

• Particularly user- and environmentally friendly
• PFAS-free
• No hazardous substance labeling
• Density: 1.09-1.13 g/ml
• Max. gap-filling capacity: 0.25 mm
• Handling strength after approx. 5-20 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 200,000 - 700,000 mPas

• Especially suitable for sealing conical / cylindrical threaded pipe fittings
• PFAS-free
• Max. thread diameter: M80
• Hand-tight after approx. 15 - 20 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 15,000 - 25,000 mPas

• Temperature-, impact-, and vibration-resistant
• PFAS-free
• Extremely high resistance to water, gas, oil, and technical chemicals
• Max. gap-filling capacity: 0.25 mm
• Hand-tight after approx. 10 - 20 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 80,000 - 160,000 mPas

• Max. thread diameter: M6
• PFAS-free
• Hand-tight after approx. 40 - 60 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 10 - 20 mPas

• Especially for heavily stressed connections as well as for securing and sealing screws, studs, nuts, threaded inserts and threaded plugs
• PFAS-free
• Max. thread diameter: M36
• Hand-tight after approx. 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 10,000 - 15,000 mPas