Maintenance

• Universal joining of a wide variety of material combinations
• Tensile and impact resistant
• Can be sanded and painted over
• Rapid curing

• Long-lasting, optimal results
• High hardness due to a 70% metal content
• Drainage-resistant and provides unlimited gap-filling

• Can be used as an alternative to solder or brazing tin: No torch or tin spatula (or wooden tool) is needed, since the product can be shaped and smoothed with an object of your choice.
• Can be painted over with a wide variety of paint systems
• Easy and clean application, as it is supplied in a 2:1 coaxial cartridge that can be applied using a standard 1K dispensing gun.

• Perfect care and sealing of all stainless steel and painted surfaces
• Environmentally friendly and silicone-free

Other package sizes are available upon request.

• Uncompromising Repair of Stainless Steel Parts
• High gloss level
• Temperature resistance: up to +300 °C

Other package sizes are available upon request.

• Dry, contactless cleaning using compressed air
• Exceptionally well-suited for delicate surfaces
• Quick cleaning of hard-to-reach spots and corners

Other package sizes are available upon request.

• Based on a special type of premium gasoline
• Optimal cleaning performance—thanks to a high evaporation rate
• Manufactured without CFCs, HCFCs, or corrosive substances
• Does not contain acetone
• Does not damage rubber or plastic parts—however, a compatibility test is required in all cases

Other package sizes are available upon request.

• Extending the Service Life of Machining Tools
• Fuel-efficient
• High heat resistance
• Good grip—drilling tools do not slip. Surface damage is prevented (e.g., tearing of the thread flanks).
• Active environmental protection by avoiding the use of chlorine, sulfur, barium, lead, cadmium, nitrate, PCBs, and formaldehyde

Other package sizes are available upon request.

• Highly effective foaming cleaner for displays and delicate surfaces
• Creating a streak-free surface
• Also for lenses, cameras, eyeglasses, and much more.

Other package sizes are available upon request.

• Perfect lubrication of sliding surfaces under extreme loads
• Water-resistant and resistant to most acids, alkalis, and saltwater
• Adhesive and abrasion-resistant
• Operating temperature: -40 °C to +1,100 °C

Other package sizes are available upon request.

• Acceleration of the Reaction of Anaerobic Adhesives
• Supporting Rapid Curing of Inactive Materials
• Improved occupational safety: Free of DMPT, and therefore less toxic; will remain available for sale even after September 2025.
• Optimal spray pattern and minimal reaction odor
• Recommended application temperature: +10 °C to +30 °C
• Spraying distance: 30 cm

• Quick-drying, smooth, non-porous surface film
• High surface gloss
• Extremely high abrasion resistance
• Temperature resistance up to approximately +500 °C

Other package sizes are available upon request.

• Ideal for stripped ball bearings
• PFAS-free
• Max. gap-filling capacity: 0.3 mm
• Set in 5–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 200,000–600,000 mPas

• Particularly user-friendly and environmentally friendly
• PFAS-free
• Without hazardous substance labeling
• Max. gap-filling capacity: 0.2 mm
• Set in 5–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 400–700 mPas

• Universal products for securing bearings in bushings and wheels on shafts
• PFAS-free
• A reliable replacement for mechanical safety elements such as keyways or wedges
• Max. gap-filling capacity: 0.2 mm
• Set after: 20–30 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 400–700 mPas

• Particularly user-friendly and environmentally friendly
• PFAS-free
• Without hazardous substance labeling
• Maximum gap-filling capacity: 0.3 mm
• Set in 5–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 3,000–6,000 mPas

• DVGW Approval (tested in accordance with DIN EN 751-1 Class H)
• PFAS-free
• Resistant to vibration, corrosion, and temperature when exposed to common industrial media
• Max. gap-filling capacity: 0.2 mm
• Density: 1.13–1.17 g/ml
• Set in 5–15 minutes
• Temperature range: -55 °C to +200 °C
• Viscosity: 5,000–12,000 mPas

• Max. gap: 0.15 mm
• PFAS-free
• Set in 5–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 100–200 mPas

• For securing bearings, bushings, and sleeves in their as-delivered condition
• PFAS-free
• Designed specifically for small gaps
• Max. gap-filling capacity: 0.15 mm
• Set after about 5–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 100–200 mPas

• Particularly user-friendly and environmentally friendly
• Without hazardous substance labeling
• Max. thread diameter: M80
• Set after: 10–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 20,000–40,000 mPas

• Fast-curing
• For sealing flanges and surfaces
• Slightly flexible sealant film
• Density: 1.09–1.13 g/mL
• Max. gap-filling capacity: 0.25 mm
• Takes about 5–20 minutes to set
• Temperature range: -55 °C to +180 °C
• Viscosity: 23,000–35,000 mPas

• Particularly user-friendly and environmentally friendly
• Without hazardous substance labeling
• Density: 1.11–1.15 g/mL
• Optical gap-filling capacity: 0.2 mm
• Set in 5–15 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 35,000–60,000 mPas

• Particularly user-friendly and environmentally friendly
• Without hazardous substance labeling
• Max. thread diameter: M80
• Set after about 15–20 minutes
• Temperature range: -55 °C to +180 °C
• Viscosity: 15,000–25,000 mPas