Mechanical Engineering

• Mode of action: cools – freezes – shrinks
• High yield

Additional container sizes available on request.

• Completely residue-free
• Leaves no film and does not corrode
• Extremely fast evaporation
• Removes traces of moisture from metal surfaces

 Additional container sizes available on request.

• No MEKO – free of butan-2-one oxime
• Meets GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Particularly user-friendly: low odor and significantly less harmful to health
• Non-corrosive, weather-/UV- and aging-resistant
• Above-average crosslinking speed, skin formation, and tack-free time
• Resistant to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as coolants and antifreeze

• No MEKO – free from butan-2-one oxime
• Complies with GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Good adhesion to metals, including non-ferrous metals
• Especially user-friendly: low-odor and significantly less harmful to health
• Non-corrosive, weather/UV-resistant and aging-resistant
• Above-average crosslinking speed, skin formation, and tack-free time
• Resistant to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as refrigerants and antifreeze
• Uniform curing regardless of external influencing factors
• High resistance to oil and high temperatures

• No MEKO – free from butan-2-one oxime
• Meets GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Good adhesion to metals, including non-ferrous metals
• Particularly user-friendly: low odor and significantly less harmful to health
• Non-corrosive, weather/UV-resistant and age-resistant
• Above-average crosslinking speed, skin formation and tack-free time
• Resistance to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as refrigerants and antifreeze
• Uniform curing regardless of external influencing factors
• High resistance to oil and high temperatures

• No MEKO – free from butan-2-one oxime
• Meets GEV EMICODE® EC1 plus – very low emissions
• Equipped with fungicide
• Good adhesion to metals, including non-ferrous metals
• Particularly user-friendly: low odor and significantly less harmful to health
• Non-corrosive, weather/UV- and aging-resistant
• Above-average cross-linking speed, skin formation and tack-free time
• Resistant to most chemical requirements in the automotive sector, such as various engine/transmission oils, as well as coolants and antifreeze
• Uniform curing regardless of external influencing factors
• High resistance to oil and high temperatures

• Invisible lubricating film with high capillary action
• Effective prevention of corrosion and wear
• Exceptionally adhesive
• Temperature resistance: -30 °C to +150 °C

Additional container sizes available on request.

• High capillary action and outstanding adhesion
• Excellent long-term resistance to water
• Prevents corrosion
• Savings in maintenance and lubricant costs through reduced downtime and repairs
• Temperature resistance: -40 °C to +150 °C (up to +250 °C for short periods)

Additional container sizes available on request.

• Universal bonding of a wide variety of material combinations
• Tensile and impact-resistant
• Can be sanded and painted over
• Rapid full curing

• Permanent, optimal results
• High hardness due to 70% metal content
• Sag-resistant and infinitely gap-filling

• Can be used as an alternative to body solder or brazing solder: burner and solder paddle/wooden tools are not required, as the product can be shaped and smoothed with an object of your choice.
• Can be painted over with a wide variety of paint systems
• Easy and clean application, as it is supplied in a corresponding 2:1 coaxial cartridge that can be used with a standard 1K dispensing gun.

• Perfect care and sealing of all stainless steel and painted surfaces
• Environmentally friendly and silicone-free

Additional container sizes available on request.

• Uncompromising repair of stainless steel parts
• High gloss level
• Temperature resistance: up to +300 °C

Additional container sizes available on request.

• Based on a special type of specialty gasoline
• Optimal cleaning effect - due to high evaporation rate
• Manufactured free of CFCs and HCFCs, as well as without corrosive substances
• Contains no acetone
• Does not attack rubber and plastic parts – however, a suitability test is required in any case

Additional container sizes available on request.

• Extends the service life of machining tools
• Economical in use
• High heat resistance
• Good adhesion – no slipping of drilling tools. Surface damage is avoided. (e.g. scoring of thread flanks)
• Active environmental protection through the absence of chlorine, sulfur, barium, lead, cadmium, nitrate, PCB and formaldehyde

Other container sizes available on request.

• Highly effective foam cleaner for displays and sensitive surfaces
• Creates a streak-free surface
• Also suitable for lenses, cameras, glasses, and much more.

Additional container sizes available on request.

• Perfect lubrication of extremely heavily loaded sliding surfaces
• Water-resistant and resistant to most acids and alkalis as well as salt water
• Adhesive and abrasion-resistant
• Operating temperature:  -40 °C to +1,100 °C

Additional container sizes available on request.

• Acceleration of the reaction of anaerobic adhesives
• Supports rapid curing on inactive materials
• Higher occupational safety: Free of DMPT, therefore less toxic and still available for sale without restrictions after September 2025.
• Optimal spray pattern and low reaction odor
• Recommended processing temperature: +10 °C to +30 °C
• Spraying distance: 30 cm

• Fast-drying, smooth, pore-free surface film
• High surface gloss level
• Extremely high abrasion resistance
• Temperature resistance up to approx. +500 °C

Additional container sizes available on request.

• High reactivity for fast assembly strength with high adhesive forces
• Ideal for fast processes with high cycle rates

• Crystal-clear results for structural, high-strength bonds
• For transparent, visually demanding bonding of plastics, especially PMMA (Plexiglas®), metals and composite materials
• Fast working thanks to 1–2 min open time and handling strength after 4–5 min
• Zero-gap bonding possible
• Simple and fast application without primer
• Odor-reduced formula
• Very good resistance to UV radiation, salt/water and chemicals
• Thixotropic properties
• Easy application even on uneven surfaces
• Excellent media resistance
• Resistance to material fatigue, impact and shock exposure
• Excellent post-processing properties: sanding, drilling and overpainting

• Ideally suited for worn ball bearings
• PFAS-free
• Max. gap-filling capacity: 0.3 mm
• Hand-tight after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 200,000 - 600,000 mPas

• Particularly user- and environmentally friendly
• PFAS-free
• Without hazardous substance labeling
• Max. gap-filling capacity: 0.2 mm
• Handling strength after: 5 - 15 minutes
• Operating temperature range: -55 °C to +180 °C
• Viscosity: 400 - 700 mPas

• Universal products for fastening bearings in bushings as well as wheels on shafts
• PFAS-free
• Reliable replacement for mechanical retaining elements such as feather keys or wedges
• Max. gap-filling capacity: 0.2 mm
• Hand-tight after: 20 - 30 minutes
• Service temperature range: -55 °C to +180 °C
• Viscosity: 400 - 700 mPas